Reply
Accepted Solution

API call to choose the IP after 4th octet 10 in a subnet

aadil7799
Techie
Posts: 3
1917     1

Is there a way to select the 4th octect of IP after 1.1.1.10 ???

 

Eg:-

 

Subnet - 1.1.1.0/24

 

but API call should choose the ip with 4th octect greater than 10

 

No IP should be selected from 1.1.1.0 to 1.1.1.10

 

Please Advise.

 

Thanks...!!!

Highlighted

Re: API call to choose the IP after 4th octet 10 in a subnet

Adviser
Posts: 93
1917     1

Hello,

 

You can add a reserved range to prevent using any addresses that should not be allocated.  In this case each network would have a reserved range from 1.1.1.1 to 1.1.1.10.

Re: API call to choose the IP after 4th octet 10 in a subnet

Adviser
Posts: 96
1918     1

You would need to add a Reservation from 1 to 10 in each of the subnets (means, the GetNextAvailableIP algo will not use any 'USED' IPs).

Re: API call to choose the IP after 4th octet 10 in a subnet

aadil7799
Techie
Posts: 3
1918     1

Thanks..!!!

Showing results for 
Search instead for 
Do you mean 

Recommended for You