Reply
Accepted Solution

The action is not allowed. A parent was not found

softestplease
Techie
Posts: 5
4771     0

Hi All,

 

Getting this error message

{ "Error": "AdmConDataError: None (IBDataConflictError: IB.Data.Conflict:The action is not allowed. A parent was not found.)",
"code": "Client.Ibap.Data.Conflict",
"text": "The action is not allowed. A parent was not found."

 

Any clue what went wrong? However, the I set DNS to FALSE (configure_for_dns=false) it works. But I need the DNS set to TRUE. 

Any work around? is it possible to select the zone manually via WAPI? Instead of put it this way  "name": "test.test.loc"?

 

Cheers,

Sofia

Re: The action is not allowed. A parent was not found

Adviser
Posts: 92
4772     0

It would be hard to understand without digging in further...  You are specifying that the host record has a DNS name, however the gridmaster cannot find a zone where that DNS name can be stored (either "test.loc" or "loc" would work).  You might have to specify the correct DNS veiew or network view so it's obvious where it should look for the zone.

Re: The action is not allowed. A parent was not found

softestplease
Techie
Posts: 5
4772     0

Hi 

 

 

Re: The action is not allowed. A parent was not found

marcosabadi
Techie
Posts: 1
4772     0

Hello All,

 

I am trying create a host via REST API, using json format. My infoblox version is 8.0.6.

 

When a sent a POST  https://infoblox.domain.net/wapi/v1.2/record:host

 

The json content: 

 

{
"name":"host001.des.domain.net",
"ipv4addrs": [
{
"ipv4addr":"10.1.1.1"
}
]
}

 

The DNS domain des.domain.net exist, however I receive the same error:  

 

{
"Error": "AdmConDataError: None (IBDataConflictError: IB.Data.Conflict:The action is not allowed. A parent was not found.)",
"code": "Client.Ibap.Data.Conflict",
"text": "The action is not allowed. A parent was not found."
}

 

 

 

Re: The action is not allowed. A parent was not found

Adviser
Posts: 92
4772     0

As mentioned above, you should define the dns view so you know where it lands.  Also define whether or not it should be used for DHCP.  If it is used for DHCP, that DHCP network must also be defined.

 

For example,

 

{ "name": "host001.des.domain.net",
  "view": "Internal",
  "ipv4addrs": [  {"ipv4addr": "10.1.1.1",  "configure_for_dhcp": false} ]
}
Showing results for 
Search instead for 
Do you mean 

Recommended for You

Infoblox ActiveTrust and a Deeper Dive Into your DNS Security