Introducing SOC Insights for BloxOne Threat Defense: Boost your SOC efficiency with AI-driven insights to eliminate manual work and accelerate investigation and response times. Read the blog announcement here.

NIOS DNS DHCP IPAM

Reply

NTP clocks

New Member
Posts: 6
3126     0

I have implemented NTP with 3 sources and It is not obvious to me which clock is being used.

The top clock has a "+"

The next one has a *

Both of these are stratum 2 clocks

The third one is a stratum 1 but shows as a stratum 16

 

The CLI documentation does not say what the + and * indicate.

Screen Shot 2019-07-30 at 11.40.42 AM.png

 

Thanks for your help

 

 

Re: NTP clocks

Expert
Posts: 185
3127     0

The one with the "*" is the one that it is currently using.

 

If it has a "+" then it will switch to that one if NTPd determines that can give better accuracy. There should normally be multiple clocks with a "+" next to it. This allows NTPd to failover to other clocks if there is a problem.

 

If any are showing stratum 16 then it is having difficulty contacting that clock - I'd check routing/firewall rules.

Paul Roberts
PCN (UK) Ltd

All opinions expressed are my own and not representative of PCN Inc./PCN (UK) Ltd. E&OE
Showing results for 
Search instead for 
Did you mean: 

Recommended for You