Learn How We Can Help You Keep Teleworkers Protected During the COVID-19 Crisis

DNS DHCP IPAM

Reply
Highlighted

No web interface but command line interface enabled on evaluation vm

Techie
Posts: 4
720     0

I am working on setting up the test VM for testing IPAM apis's. After loading the evaluation ova file for 8.4.4 in vmWare, only command line interface is available. 

 

Infoblox > show network
Current LAN1 Network Settings:
IPv4 Address: 192.168.1.2
Network Mask: 255.255.255.0
Gateway Address: 192.168.1.1

VLAN tag: untagged
HA enabled: false
Grid Status: Master of Infoblox Grid

 

 

any ideas of how to enable the web UI

 

 

Highlighted

Re: No web interface but command line interface enabled on evaluation vm

Techie
Posts: 12
721     0

VM instances wont run GUI till a vNIOS or NIOS license is added to it. To add a temporary vNIOS/NIOS license, use the CLI command "set temp_license". Once added, the appliance will restart product(not the same as a reboot) and then start the GUI.

 

You can also change network settings using the CLI command "set network"

Highlighted

Re: No web interface but command line interface enabled on evaluation vm

Techie
Posts: 4
721     0

I tried running the set temp_license command and selected number 4) Add NIOS license. it lists out options 

1. IB-V805

2. CP-V805

3. IB-V815

4. IB-V825

5. IB-V1405

6. CP-V1405

7. IB-V1415

8. IB-V1425

9. IB-V2205

10. CP-V2205

11. IB-V2215

12.IB-V2225

13.IB-V2005

14.IB-V4015

15.IB-V4025

16.IB V-5005

 

I have selected various options but none of them worked. is there anything I am missing?

Highlighted

Re: No web interface but command line interface enabled on evaluation vm

Moderator
Moderator
Posts: 147
721     0

You might want to add a second HDD, if you haven't done so already on these new SoT models and try again.

 

Best Regards,
Bibin Thomas

Highlighted

Re: No web interface but command line interface enabled on evaluation vm

Techie
Posts: 4
721     0

I am running the evaluation version on my VMware. not sure if adding a second HDD is an option?

Highlighted

Re: No web interface but command line interface enabled on evaluation vm

Moderator
Moderator
Posts: 147
721     0

My apologies. I take back what I said. I believe a second HDD is only requried for SoT Reporting models.

Could you please confirm if you are encountering an error while selecting the model and could you please list out the currently installed licenses using "show license"?

 

Thank you,

Bibin Thomas

Highlighted

Re: No web interface but command line interface enabled on evaluation vm

[ Edited ]
Techie
Posts: 4
721     0

the `Show license` part has following

 

Infoblox> show license

Version 8.4.4-386831

Hardware ID : 564D682D74D23F5757F29E4F51D5BFCF

 

 

 

Screen Shot 2020-02-20 at 1.43.42 PM.png

 

Is there any command to  launch UI interface?

Highlighted

Re: No web interface but command line interface enabled on evaluation vm

Moderator
Moderator
Posts: 147
721     0

WebUI can be restarted by issuing the command

set maintenancemode

debug webui restart

However, the point is that, ideally it should already be running on your system. Therefore you may want to issue the command "show log debug /Jetty/" and review the last few lines of the logs on this regards. In a working condition we would expect to find the log "Jetty is up! Switch to normal monitoring". A couple of failure logs prior to the working logs message is expected.

What is the message that you receive on the browser when you attempt access the UI?

 

 

Best Regards,
Bibin Thomas

Showing results for 
Search instead for 
Do you mean 

Recommended for You

Businesses are investing heavily into securing company resources from cyber-attacks form cybercrimin