08-16-2019 10:18 AM
Does anyone have instructions how to set up an Avocent / Vertiv Console Server (ACS) in NetMRI for configuration managment via SSH?
08-16-2019 10:36 AM
Going by the device support list for the current release following avocentsare supported:
ASC6048, versions 184.108.40.206, 220.127.116.11, 18.104.22.168, 22.214.171.124, 126.96.36.199
Are you on NetMRI 7.3.2 and seeing different behavior?
08-16-2019 10:46 AM
Our ACS6000s are currently sitting at version 188.8.131.52 and we are using NetMRI 7.3.2.
ACS 184.108.40.206 to 220.127.116.11 did not have much config changes, so I would think it should still work.
I am trying to find documentation or guidance to at least get the CLI credentials past testing. I am attemptiong to use SSH. The test fails eventhough I can confirm credentials match in the ACS appliance and its managment server (DSView).
I have the user at its higest pre-emptive access rights, so I wonder if there is something specific I am missing withing the ACS config to enable NetMRI to autheticathe and get the config.
The device support list says ACS has been validated by support, so I would think there are procedures to at least set up CLI to the ACS. I cannot find any tho.
Any help is much appreciated.
08-16-2019 11:34 AM
I would open up a ticket with support, if it is not much of a change they can modify the device support bundle for your version. They would also be able to see where exactly it is going wrong.