11-20-2015 09:37 AM
I'm new to NetMRI and was wondering about the best way to implement DHCP-snooping on our HP ProCurve switches. The following commands are used to enable this feature:
*Add DHCP Servers*
switch(config)# dhcp-snooping authorized-server <DHCP Server IP>
*Allow DHCP ACK replies to be sent from the uplink interfaces*
switch(config)# dhcp-snooping trust <Uplink Ports>
*Start DHCP snooping on each vlan*
switch(config)# dhcp-snooping vlan <Vlan-IDs>
*Disable option 82 insertion*
switch(config)# no dhcp-snooping option 82
*View DHCP-snooping configuration*
switch(config)# show dhcp-snooping
What is the best way to create a rule and policy to check this, based on the resulting output of the "show dhcp-snooping" command?
How do I set a script to trigger based on policy compliance?
What is the best way to script this?
How do I specify the uplink ports in the script?
11-20-2015 03:12 PM
Prompting a user for a variable in a Script
Add DHCP Snooping
dhcp-snooping trust $int
They others are more complex and I would suggest that you reach out to your account to look at purchasing some PS time.(PS teaches you as well as writes scripts for you )
You can build a custom issue and run the command "show dhcp-snooping" then parse it and look for the correct data then generate an Issue in NetMRI
If you post the output I can see if I have some time next week to help you in the write direction.