Reply

Netmri integration with huawei appliances using snmp v3

Techie
Posts: 6
2270     0

Dealling with Netmri on ver. 7.1.4     during network running network discovery we faced strange issue when working  with snmp ver.3 , when configuring huawei router or swtich to use snmp v3 with SHA & AES , i got error in time synchronization & credential not found however if we changed AES to Des ( this option only ) it passed without any error ,, can anyone advise regarding this.?

Re: Netmri integration with huawei appliances using snmp v3

Techie
Posts: 6
2271     0

It good to point that we checked the time in the appliances and it is the same in both

Re: Netmri integration with huawei appliances using snmp v3

Moderator
Moderator
Posts: 68
2271     0

Open a case if no one replies to this.

@DaveSignori

Re: Netmri integration with huawei appliances using snmp v3

Adviser
Posts: 65
2271     0

Hi Mohamed,

 

This doesn't seem to be an expected behavior. At least, 24 Huawei models are supported in NetMRI 7.1.4. You can find the device support list from the link below

 

https://docs.infoblox.com/display/ILP/NetMRI 

 

If the Huawei model in question is a supported device, this may be a bug. Please open a case with support to report this.

 

If not, you can still reach out to support and get the model officially supported by NetMRI

Showing results for 
Search instead for 
Did you mean: 

Recommended for You