Learn How We Can Help You Keep Teleworkers Protected During the COVID-19 Crisis

Security

Reply
Highlighted

Infoblox and Altiris

Guru
Posts: 73
1244     0

Hello

In our Infoblox - environment the IP phones owns option 43. Hence i needed a way to point clients (Force boot) to Altiris PXE servers without IP helpers, while preserving IP phones option 43. Heres how i did:

Our Altiris server is at ip 10.46.108.207  In Infoblox Hex the Altiris way this is  6:1:B:8:7:AA:AA:1:0A:2E:6C:CF 

                                                                                                            (option 6=1=11 Option 8=7=AA AA(Altiris) 1 and ip in  HEX)

That is the "network" option 43 and bootfile  is

BStrap\\X86pc\\BStrap.0

bootserver is

10.46.108.207

--------

That accounts for the "Fixed Address" clients. Now the Scope (which includes the IP Phones):

Global option 43 is normal option 43 for the IP Phones  And then the trick Smiley Happy IPv4 filter "option filter" ;

set filter = option 60= PXEClient:Arch:00000:UNDI:00200 and the put the option 43 above AND the Bootfile settings above into this filter.

 

Now the phones gets the unfiltered option 43 and the PXE clients gets the other...

 

The above could have saved me hours and hours of headache. Hope it can help somebody out there....

 

/JanV - Denmark

 

Showing results for 
Search instead for 
Do you mean 

Recommended for You