Learn How We Can Help You Keep Teleworkers Protected During the COVID-19 Crisis

VMware

Reply
Highlighted

Issue same ip address tail for multi interfaces in vRA/vRO 7.4

Techie
Posts: 2
9089     0

Hi ,

We have multi interfaces on each vm connect to different segments ,  Can I issue the same address tail for those interfaces in vRA/vRO 7.4

Example:
Interface 1 -> 11.1.10.10
Interface 2 -> 11.1.20.10

Interface 3 -> 11.1.30.10

Highlighted

Re: Issue same ip address tail for multi interfaces in vRA/vRO 7.4

Community Manager
Community Manager
Posts: 356
9089     0

I'm not sure I understand what you are asking here, but devices can have multiple IP addresses and NIOS will be able to track each of those separately in IPAM. DNS has no issue with multiple IP's under a single name.

 

Regards,

Tony

Highlighted

Re: Issue same ip address tail for multi interfaces in vRA/vRO 7.4

[ Edited ]
Techie
Posts: 1
9089     0

hey there!!!

 

I am also facing this issue... The multiple interfaces in vRA/vRO are having problem of same ip issues. I tried to change ip addresses with changing the internet connections. But, still its not working! How to fix this issue???

 

Thanks

 

<Moderator> External link removed.

Highlighted

Re: Issue same ip address tail for multi interfaces in vRA/vRO 7.4

[ Edited ]
Techie
Posts: 1
9090     0

@Eli187 wrote:

hey there!!!

 

I am also facing this issue... The multiple interfaces in vRA/vRO are having problem of same ip issues. I tried to change ip addresses with changing the internet connections. But, still its not working! How to fix this issue???

 

Thanks


Highlighted

Re: Issue same ip address tail for multi interfaces in vRA/vRO 7.4

Techie
Posts: 1
9090     0

vRealize Orchestrator Appliance on the same IP address and FQDN.

Highlighted

Re: Issue same ip address tail for multi interfaces in vRA/vRO 7.4

[ Edited ]
Techie
Posts: 1
9090     0

You cannot use the same IP address on multiple interfaces. It just won't work properly (usually it will only work on the last interface the IP was assigned on). You need to put the ethernet interfaces into a bridge and assign the IP address on the bridge itself.

Highlighted

Re: Issue same ip address tail for multi interfaces in vRA/vRO 7.4

[ Edited ]
Techie
Posts: 1
9090     0

You cannot use the same IP address on multiple interfaces. It just won't work properly (usually it will only work on the last interface the IP was assigned on). You need to put the ethernet interfaces into a bridge and assign the IP address on the bridge itself.

Add routing tables and rules binding source IP address for each route, and add those as default gateway for each network interface.

Assuming this networking enviroment 

Add new routing tables in /etc/iproute2/rt_tables

Add routes to those routing tables

Add rules to apply traffic to the routing tables

Set interfaces ready for receiving ARP replies

Checking ping with -I IPADDR

To make this routes persistent following configuration files have to be changed

  • For network addresses and routes:

    For routing rules:

    For receiving ARP replies:

    For sending ARP:

     

     

    Note: Refer to /usr/share/doc/kernel-doc-<version>/Documentation/networking/ip-sysctl.txt for more information about these setting.

Showing results for 
Search instead for 
Do you mean 

Recommended for You