Are you interested in our Early Access Program (EAP)? This program allows you to preview code, test in your lab and provide feedback prior to General Availability (GA) release of all Infoblox products. If so, please click the link here.

NIOS DNS DHCP IPAM

Reply

NTP clocks

Techie
Posts: 6
2275     0

I have implemented NTP with 3 sources and It is not obvious to me which clock is being used.

The top clock has a "+"

The next one has a *

Both of these are stratum 2 clocks

The third one is a stratum 1 but shows as a stratum 16

 

The CLI documentation does not say what the + and * indicate.

Screen Shot 2019-07-30 at 11.40.42 AM.png

 

Thanks for your help

 

 

Re: NTP clocks

Expert
Posts: 171
2276     0

The one with the "*" is the one that it is currently using.

 

If it has a "+" then it will switch to that one if NTPd determines that can give better accuracy. There should normally be multiple clocks with a "+" next to it. This allows NTPd to failover to other clocks if there is a problem.

 

If any are showing stratum 16 then it is having difficulty contacting that clock - I'd check routing/firewall rules.

Paul Roberts
PCN (UK) Ltd

All opinions expressed are my own and not representative of PCN Inc./PCN (UK) Ltd. E&OE
Showing results for 
Search instead for 
Did you mean: 

Recommended for You