DISA STIG Update - 3 November 2020

Ingmar
Ingmar
in NetMRI Configuration Policy Service

This package is a major upgrade since the last release and will update the DISA STIG Policies and Policy Rules on a given NetMRI to the STIG libraries released on 2020-08-11 (SRG-STIG Library - NON-FOUO).

 

To keep coverage for Security Technical Implementation Guide (STIG)Compliance after the Network STIG's sunset, the vendors which were previously covered by the generic STIG bundles were updated to their vendor-provided STIG Guidance.

 

In this archive, the following STIG Policies are provided:

  • Cisco IOS-XE Router STIG Ver 1, Rel 4
  • Cisco IOS-XR Router STIG Ver 1, Rel 4
  • Cisco IOS Router STIG Ver 1, Rel 4
  • F5 BIG-IP Device Management 11.x STIG Ver 1, Rel 7
  • F5 BIG-IP Local Traffic Manager 11.x STIG Ver 1, Rel 4
  • Juniper Router STIG Ver 1, Rel 5
  • Juniper Router Network Device Management STIG Ver 1, Rel 5
  • Palo Alto Networks Application Layer Gateway STIG Ver 1, Rel 5
  • Palo Alto Networks Intrusion Detection and Prevention System STIG Ver 1, Rel 4
  • Palo Alto Networks Network Device Management STIG Ver 1, Rel 4

The installation program will update existing rules on the device based on the title of the existing rules; if the program cannot find the rule that is being updated, it will create the new rule(s) from the latest STIG libraries. It will also remove rules that are no longer needed that have been found on the device.

 

INSTALLATION
============
See the accompanying file INSTALL U_SRG-STIG_2020_07v2

 

MD5
============
12f420cc7ce678445a8c1551d283d6d1 U_SRG-STIG_2020_07_Update.tar.gz

Categories