01-30-2013 07:48 PM
We have a grid in a separate subnet that provides the IP addreses for our pxe clients that would connect to a Windows WDS server. we have configured the infoblox pxe subnet scope with a pxe 5 min lease time, option 60, next-server ip, boot file server ip and a boot file name of image.wim. based on the packet capture, infoblox provided the correct options and found that it is being offered by an Ip address at least twice but the Hp laptop just hangs in the DHCP..... mode and eventually would prompt that the network was not found. Appreciate any assistance on this.
Our NIOS is 6.6.1.x so it is fairly new.
01-31-2013 09:01 AM
Well, I have gotten further and the PXE client is now showing that it is getting an IP address Mask and Gateway that the Infoblox was providing.
Now there is an error on the client that says
PXE-M0F: Exiting Intel Agent
I removed DHCP option 60 and provided the TFTP Server address in the Next-server and Boot Server as well as teh boot file Share$\boot\image.wim