Reply

DHCP Failover Association with Evaluation

Not applicable
Posts: 1
4547     0
Hello, I am trying to set up a DHCP Failover Association with two Virtual Evaluation appliances configured in a grid. When I add the two nodes with the wizard, the status reads Failure and when I click on each server the status says "unknown". Is there a way to get more information to troubleshoot this issue? I am thinking that it may not be possible to do this with the eval, or there may be an issue with using the same eval OVF twice.

RE: DHCP Failover Association with Evaluation

Not applicable
Posts: 1
4547     0

Hello Marc,

I heard you are in contact with the territory team.  They should be able to help you with this issue, but I wanted to make sure we closed the loop.  The issue is (almost always) that the Network that the DHCP Range is part of is not assigned to the 2 nodes that are part of the DHCP failover association. Another common issue is that the you have gone thru all the steps and then not turned on the DHCP service on both members.  Please let me know if you are continuing to have issues.  I would be more than happy to assist.

Thanks,

Mark

Showing results for 
Search instead for 
Did you mean: 

Recommended for You