Introducing SOC Insights for BloxOne Threat Defense: Boost your SOC efficiency with AI-driven insights to eliminate manual work and accelerate investigation and response times. Read the blog announcement here.

Getting Started

Reply

Error during join process

Authority
Posts: 6
11802     0

Hello,

 

New member is not able to join to Grid master. On member I see the next status:

"The hardware type is not allowed to join as a tagged vlan configured node"

 

But LAN and HA ports are configured as Untagged.

 

Are there any ideas of the reason?

 

Thank you in advance.

Re: Error during join process

Adviser
Posts: 11
11802     0

Check your settings on the Member element in the UI. Did you accidentally configure tagging there?

 

If that does not help, you might want to re-create the object, run 'reset all' on the member and try again.

 

If that doe not help, call Support.

 

 

Re: Error during join process

Authority
Posts: 6
11802     0

Hello,

 

Thank you for youir reply.

 

No, vlan is Untagged. We contacted with support and most likely the issue caused by SW version mismatch.

Member has a bit newer version than Grid master.

We are going to downgrade the member soon. I will update this topic after that.

Re: Error during join process

Authority
Posts: 6
11803     0

Indeed, I overlooked vlan tagging on Grid master. But anyway we cannot join member to Grid due to version mismatch.

Member HW version can run only on SW version newer than version we have on Grid master.

 

Re: Error during join process

[ Edited ]
New Member
Posts: 1
11803     0

Check your settings in the member component of the user interface. 

 

Thanks   vpn black friday sale

MATT LE BLANCC
Showing results for 
Search instead for 
Did you mean: 

Recommended for You