DEPLOYMENT GUIDE. INTEGRATION WITH TENABLE SECURITY CENTER
Adviser
Posts: 171
Registered: ‎09-09-2015
Adviser
Posts: 81

Hi there,

 

The integration is straight forward and does not require a lot of time to implement it using the templates and the video attached to this post.

The deployment guide attached to the post contains detailed step-by-step instruction how to do it.

 

If you have any questions don't hesistate to ask.

 

BR,

Vadim

Re: DEPLOYMENT GUIDE. INTEGRATION WITH TENABLE SECURITY CENTER
New Member
Posts: 3
Registered: ‎07-14-2019
New Member
Posts: 3

Hi ,

 

how can i upload TNBL_create_EAs.php

Re: DEPLOYMENT GUIDE. INTEGRATION WITH TENABLE SECURITY CENTER
Adviser
Posts: 171
Registered: ‎09-09-2015
Adviser
Posts: 81

Upload?

It's a script to create EAs on NIOS. It should be executed on a workstation/server from which you can access NIOS via API.

Re: DEPLOYMENT GUIDE. INTEGRATION WITH TENABLE SECURITY CENTER
New Member
Posts: 3
Registered: ‎07-14-2019
New Member
Posts: 3

can i have more detals how to do that please

Re: DEPLOYMENT GUIDE. INTEGRATION WITH TENABLE SECURITY CENTER
Adviser
Posts: 171
Registered: ‎09-09-2015
Adviser
Posts: 81

Could you please clarify?

Obviously you need PHP installed as well as change the GM IP and credentials in the script.

To execute it you need to tipe sometning like in CLI (depends on OS)

php TNBL_create_EAs.php

 Instead of that you can create required EAs manually on GM.

Re: DEPLOYMENT GUIDE. INTEGRATION WITH TENABLE SECURITY CENTER
New Member
Posts: 3
Registered: ‎07-14-2019
New Member
Posts: 3

Thanks you Vadim ,

I can ncreat that one ,but the problem with value .

 

Thanks

Re: DEPLOYMENT GUIDE. INTEGRATION WITH TENABLE SECURITY CENTER
Moderator
Posts: 84
Registered: ‎06-21-2017
Moderator
Moderator
Posts: 69

Hello Mazinos,

This PHP file is not a template for NIOS.

the PHP file is used to run on your computer (Linux, Microsoft, Mac) and it will automatically configure your NIOS device with the correct Extensible Attributes (EA's). You may also manually add the EA's into the NIOS appliance without the PHP script.

 

The PHP script is only created to make your life a little bit easier. If you are not familiar with working with scripts, I would skip using the PHP script and just manually add the EA's yourself. the Deployment guide should walk you through all that.

Thank you,
Kevin Zettel

Re: DEPLOYMENT GUIDE. INTEGRATION WITH TENABLE SECURITY CENTER
New Member
Posts: 1
Registered: ‎08-18-2022
New Member
Posts: 1

Can someone on clarify the statemnt in the known limitation section wehn it says: IPv6 networks and addresses can be added to Tenable SC by the assets. However, Tenable SC does not
support direct scanning of IPv6 addresses.

 

Specifically can you clarify the "Tenable.sc does not support direct scanning of IPv6"?