Are you interested in our Early Access Program (EAP)? This program allows you to preview code, test in your lab and provide feedback prior to General Availability (GA) release of all Infoblox products. If so, please click the link here.

Getting Started

Reply

ccs script for cisco 3750 to upgrade a stack of switches.

[ Edited ]
Authority
Posts: 9
10284     0

howdy,

 i have figured out how to write a script to upgrade a single 3750 switch, but i have stacked switches as well and am looking for a script to upgrade x# of switches in the stack with a new IOS using NetMRI simultaneously. 

Re: ccs script for cisco 3750 to upgrade a stack of switches.

Posts: 2
10284     0

The "IOS Image Upgrade" hacked pretty well although I didn't use it for any stacks. Can you share your code?

Re: ccs script for cisco 3750 to upgrade a stack of switches.

Authority
Posts: 9
10284     0

this is what worked.

copy flash:c3750e-universalk9-mz.152-4.E4.bin flash2: \r
copy flash:c3750e-universalk9-mz.152-4.E4.bin flash3: \r

Re: ccs script for cisco 3750 to upgrade a stack of switches.

Authority
Posts: 9
10284     0

delete flash:c3750e-universalk9-mz.152-4.E5.bin \r\ry
delete flash2:c3750e-universalk9-mz.152-4.E5.bin \r\ry
delete flash3:c3750e-universalk9-mz.152-4.E5.bin \r\ry\r
copy http://10.2.16.11:26/tftp/3750/c3750e-universalk9-mz.152-4.E4.bin flash: \r
copy flash:c3750e-universalk9-mz.152-4.E4.bin flash2: \r
copy flash:c3750e-universalk9-mz.152-4.E4.bin flash3: \r
config term
no boot system
boot system switch all flash:c3750e-universalk9-mz.152-4.E4.bin \r
end
write memory \r
reload \r
\r

 

the issue i am working now is that i want to use this script for all 3750 stacked and non stacked switches. but if the switch does not have 3 or 2 switches in the stack the task will error out and fail. i guess what i need is something that will see the error and move on to the next step. 

Re: ccs script for cisco 3750 to upgrade a stack of switches.

Authority
Posts: 9
10285     0

recently discoverd that using a .tar file solves my issue here. you just have to use the archive download-sw command to make it all happen, the switch will load the new IOS on all the switches in the stack automatically. 

Showing results for 
Search instead for 
Did you mean: 

Recommended for You