Reply

ARP table on HA pair

New Member
Posts: 4
1627     0

Working on upgrading older 1400 series appliances with new ones.  Ran into a problem with the first passive upgrade.  My question is, why does the ACTIVE appliance ARP table show Passive Interface IP's as <incomplete> no MAC address on both the LAN1 and the HA interfaces.  Passive ARP table shows IP's and MAC addresses for either LAN1 or the MGMT interfaces, only.

Any ideas?  Appreciate any help.

 

Re: ARP table on HA pair

New Member
Posts: 4
1627     0

This is what it looks like.

 

? (10.20.5.12) at <incomplete> on LAN1
? (10.20.16.1) at 00:00:0c:9f:f0:01 [ether] on MGMT
? (10.20.5.14) at 3c:ec:ef:72:b4:21 [ether] on HA
? (10.20.5.5) at 00:00:5e:00:01:08 [ether] on LAN1
? (10.20.5.14) at <incomplete> on LAN1
? (10.20.16.3) at 28:6f:7f:7e:a1:e9 [ether] on MGMT
? (10.20.5.54) at <incomplete> on LAN1
? (10.20.5.7) at <incomplete> on LAN1
? (10.20.5.12) at <incomplete> on HA
? (10.20.5.8) at <incomplete> on LAN1
? (10.20.5.3) at 28:6f:7f:7e:a1:e9 [ether] on HA
? (10.20.5.1) at 00:00:0c:9f:f0:01 [ether] on LAN1
? (10.20.5.29) at <incomplete> on LAN1
? (10.20.5.3) at 28:6f:7f:7e:a1:e9 [ether] on LAN1
? (10.20.5.1) at 00:00:0c:9f:f0:01 [ether] on HA
? (10.20.5.8) at 0c:c4:7a:b4:1f:ee [ether] on HA
? (10.20.5.9) at <incomplete> on LAN1
? (10.20.16.2) at 28:6f:7f:7e:9e:47 [ether] on MGMT
? (10.20.5.2) at 28:6f:7f:7e:9e:47 [ether] on HA
? (10.20.5.6) at 00:00:5e:00:01:08 [ether] on LAN1

Re: ARP table on HA pair

New Member
Posts: 1
1627     0

Hello,

Same issue in my enviroment,

we ran the reset arp command for the reset of the tables, but the problem continues

show arp incomplete message

(IP address) at <incomplete> on LAN1

and does not show your mac address

Is not respond when try a ping to the IP gateway

 

any suggestions to resolve this issue?

 

 

Showing results for 
Search instead for 
Did you mean: 

Recommended for You