Reply

HA with two Trinzic appliances of different models

Member
Posts: 1
253     1

Hello,

Is it possible to configure two Trinzic appliances of different models in high availability (HA) mode ?

Primary - Trinzic 1410

Secondary - Trinzic 1405

 

Both in same NIOS version.

Re: HA with two Trinzic appliances of different models

Authority
Posts: 42
253     1

AlaJeb,

 

Yes you can do it, but it is not best practice.  A concern would be the database size between the two models.

 

Hope this helps.

 

Thomas

Re: HA with two Trinzic appliances of different models

Techie
Posts: 13
253     1

Hi,

 

Since Infoblox uses VRRP protocol for HA communications, I guess you can do that, however I'd do it with two appliances of the same model.

 

Regards.

Re: HA with two Trinzic appliances of different models

Member
Posts: 2
253     1

that should be fine.
The key here is the 1405 needs to be licensed as a 1415 or 1425. 

The DB sizes are the same (1410 vs 1415) or larger (if going to 1425)

That being said, the 1410 is end of life/end of support, so I'm hoping this is a migration and not a permanent state of affairs. 

Showing results for 
Search instead for 
Did you mean: 

Recommended for You