Search

I'm trying to import SNMPv3 credentials similar to the way SSH credentials are imported in this article: https://support.infoblox.com/s/article/3636. Any help is appreciated on the exact format of th...

How do I edit the pre-commands from a config template or CCS script? For example, the following commands are not supported on the switch:   enable terminal no editing   The switch is a...

I am attempting to create an automated job for issue  Config Running Not Saved. Ideally, whenever this issue is found, it could email an alert. Then I would like to schedule a nightly job to...

Hey folks,   Is there any way to mark a device as "decommissioned" in NetMRI, which will retain it within the database, but not actively manage the device? What if we replace a device but stil...

I'm trying to write a NetMRI CCS script to clean up some additional flash directories on our Cisco devices, however, I'm trying to use a regex in the Trigger Variable to get the .bin file *after* the...

We are looking to remove our NetMRI server from our network.  Currently it is inoperable.  Unable to access it through https but can through CLI.  We no longer have support on the box....

I want to check port setting on HP switches. The problem is that not all port parameters are under "interface" setting like on Cisco. So i want to check the setting when it an access port without a ...

Hi,   There is way to reload switch by using Ad Hoc Command Batch?   Thank you,

Hello,   We currently keep network devices in the NetMRI database for 30 days after their physical removal (in order to retain the device configuration backup). However, this leads to connecti...

Dear All,   I have a script that finds the cdp n and uses that outcome as the interface description. PS: I found this script on github   This script works well, a bit to well. I only w...