Introducing SOC Insights for BloxOne Threat Defense: Boost your SOC efficiency with AI-driven insights to eliminate manual work and accelerate investigation and response times. Read the blog announcement here.

NIOS DNS DHCP IPAM

Reply

Recover from HA broken status

New Member
Posts: 1
564     0

Hello,

 

I've recently had a failed member due to hardware issue. I have received a replacement hardware and we are ready to add the new member to the HA pair.

 

The procedure I intend to follow is perform a set network adding it to the GRID with the respectie HA VIP.

 

My concern comes from the current error message displayed "HA broken". I am not sure, if once I add the new member, this will be gone, or I should do any action prior to adding the new member to the HA pair.

 

Thanks

Mario

Re: Recover from HA broken status

Moderator
Moderator
Posts: 286
564     0

If replacing a single node of an HA pair, you should configure the replacement with the LAN1 address if the offline member (not the VIP address, as it's already in use on the network).

Please see:

https://support.infoblox.com/s/article/Infoblox-hardware-replacement-swaps-for-NIOS-or-NetMRI-config...

Showing results for 
Search instead for 
Did you mean: 

Recommended for You