Recover from HA broken status

[#1]

Hello,

I've recently had a failed member due to hardware issue. I have received a replacement hardware and we are ready to add the new member to the HA pair.

The procedure I intend to follow is perform a set network adding it to the GRID with the respectie HA VIP.

My concern comes from the current error message displayed "HA broken". I am not sure, if once I add the new member, this will be gone, or I should do any action prior to adding the new member to the HA pair.

Thanks

Mario

[#2]

If replacing a single node of an HA pair, you should configure the replacement with the LAN1 address if the offline member (not the VIP address, as it's already in use on the network).

Please see:

https://support.infoblox.com/s/article/Infoblox-hardware-replacement-swaps-for-NIOS-or-NetMRI-config...