Reply

Trinzic 1405 DHCP

New Member
Posts: 1
169     0

Hi all,
I am new at infoblox. I have one infoblox Trinzic 1405 device.
I want to configure the DHCP pools in it and connect to our network.
How can I start the configuration, basic startup and then adding license and DHCP pools. can anyone help ?

Re: Trinzic 1405 DHCP

Adviser
Posts: 51
169     0

Hi,

 

Only a single device? In general DHCP should be deployed as two appliances for resiliancy and service availability. TE-1405 is a hardware model. You will have either the TE-1415 software or the TE-1425 software.

 

Full configuation of a device from scratch into a DHCP server would be beyond the scope of a forum like this so I recommend you contact your account team and see if they can get you access to the Infoblox training which covers all of this in detail.

 

Configuration documentation is here:

https://docs.infoblox.com/space/nios90/319488802/Creating+a+Grid+Master

 

Licence documentation is here:

https://docs.infoblox.com/space/nios90/280667194/Managing+Licenses+in+NIOS+9.0.0

 

DHCP documentation is here:

https://www.youtube.com/playlist?list=PLByRZeLczdFu69rmOAIq--J-RqnObceIF

 

There are some unoffical (non-Infoblox) YouTube Videos as well for NIOS configuration such as this series.

 

 

If it really is a single appliance you probably will need to run the following tasks

1) Set LAN1 IP (CLI)

2) Set licences (or "set temp_license" on CLI for 60 day trial licences. You will need NIOS and NS1 (Grid, DNS and DHCP)

3) Enable DHCP service.

4) Configure DHCP under "UI > Data Management > DHCP".

 

There is more to it but that is the general process.

Showing results for 
Search instead for 
Did you mean: 

Recommended for You