THE GAME HAS CHANGED

Introducing Infoblox Universal DDI ManagementTM

Watch the launch to discover the new era of management for critical network services. Watch Now

NIOS DNS DHCP IPAM

Reply

Trinzic 1405 DHCP

New Member
Posts: 1
569     0

Hi all,
I am new at infoblox. I have one infoblox Trinzic 1405 device.
I want to configure the DHCP pools in it and connect to our network.
How can I start the configuration, basic startup and then adding license and DHCP pools. can anyone help ?

Re: Trinzic 1405 DHCP

Adviser
Posts: 64
570     0

Hi,

 

Only a single device? In general DHCP should be deployed as two appliances for resiliancy and service availability. TE-1405 is a hardware model. You will have either the TE-1415 software or the TE-1425 software.

 

Full configuation of a device from scratch into a DHCP server would be beyond the scope of a forum like this so I recommend you contact your account team and see if they can get you access to the Infoblox training which covers all of this in detail.

 

Configuration documentation is here:

https://docs.infoblox.com/space/nios90/319488802/Creating+a+Grid+Master

 

Licence documentation is here:

https://docs.infoblox.com/space/nios90/280667194/Managing+Licenses+in+NIOS+9.0.0

 

DHCP documentation is here:

https://www.youtube.com/playlist?list=PLByRZeLczdFu69rmOAIq--J-RqnObceIF

 

There are some unoffical (non-Infoblox) YouTube Videos as well for NIOS configuration such as this series.

 

 

If it really is a single appliance you probably will need to run the following tasks

1) Set LAN1 IP (CLI)

2) Set licences (or "set temp_license" on CLI for 60 day trial licences. You will need NIOS and NS1 (Grid, DNS and DHCP)

3) Enable DHCP service.

4) Configure DHCP under "UI > Data Management > DHCP".

 

There is more to it but that is the general process.

Showing results for 
Search instead for 
Did you mean: 

Recommended for You