Introducing SOC Insights for BloxOne Threat Defense: Boost your SOC efficiency with AI-driven insights to eliminate manual work and accelerate investigation and response times. Read the blog announcement here.

API & Integration, DevOps,NetOps,SecOps

Reply

Add existing MS Dhcp Failover Association to DHCP range

Techie
Posts: 9
3144     0

The following code returns a 400 when ran. I think it may have something to do with the ms_server fields. Does anyone know what these should be? 

I know the server_association_type is correct as thats clearly documented, however im not sure if for the ms_server fields, do i need to specify the "name" of the failover assoation etc ... 

dhcp_range_payload = json.dumps({"start_addr": dhcp_ib_range_prefix + '100',
"end_addr": dhcp_ib_range_prefix + '245',
"server_association_type": "MS_FAILOVER",
"network_view": "default",
"name": comment_dict[ib_subnet],
"ms_server": {"_struct": "msdhcpserver",
"ipv4addr": "dcedhcp02.insightglobal.net"},
"ms_options":
[{"name": "routers",
"num": 3,
"value": ib_gateway_ip}],
})

 

Re: Add existing MS Dhcp Failover Association to DHCP range

Techie
Posts: 9
3144     0

I found a field i was missing for "failover associtation" With this code i am not getting: 

{ "Error": "AdmConDataError: expected single object, got 2"}

 

# Add DHCP ranges to subnets
dhcp_clean_ip_address_list = ib_subnet.replace(' ', '').split('.')
dhcp_clean_ip_address_list.pop(3)
dhcp_clean_ip_address_list.append('')
dhcp_ib_range_prefix = '.'.join(dhcp_clean_ip_address_list)
ranges_url = "https://172.18.101.100/wapi/v2.7/range"
dhcp_range_payload = json.dumps({"start_addr": dhcp_ib_range_prefix + '100',
"end_addr": dhcp_ib_range_prefix + '245',
"server_association_type": "MS_FAILOVER",
"failover_association": "dcedhcp02.insightglobal.net-dcwdhcp02.insightglobal.net",
"network_view": "default",
"name": comment_dict[ib_subnet],
"ms_options":
[{"name": "routers",
"num": 3,
"value": ib_gateway_ip}],
})
ib_dhcp_response = requests.request("POST", ranges_url, headers=headers, data=dhcp_range_payload, verify=False)
bar.finish()
print(ib_dhcp_response.content)

 Any ideas ??

Re: Add existing MS Dhcp Failover Association to DHCP range

Moderator
Moderator
Posts: 286
3144     0

I'm getting the same error message.  It works through the NIOS GUI.  It works when I assign the range to a single MS server. But not when I try to assign the range to the failover association. It appears to be a defect.  Can you please open a support case and give them the details, along with your NIOS and Windows Server versions.  You're welcome to refer to this forum post also, when you open the case.

Re: Add existing MS Dhcp Failover Association to DHCP range

New Member
Posts: 2
3144     0

Hi,

 

This is a known bug: NIOS-85974.  Support told me it it is targeted to be fixed in 8.6.3 and 9.0.  In the meantime you can work around generating a CSV import file and using a CSV upload over WAPI. 

 

Regards,

Christina.

Re: Add existing MS Dhcp Failover Association to DHCP range

Techie
Posts: 10
3145     0

Hi Christina,

 

I have 8.6.3, but still having issue in python code.  It works fine in postman.  Can you help shred some light, please?

 

Peter

 

https://community.infoblox.com/t5/api-examples/quot-404-client-error-not-found-for-url-quot-with-ran...

Re: Add existing MS Dhcp Failover Association to DHCP range

Techie
Posts: 9
3145     0
Hey, I wanted to check in on this… has support been aware of that this feature is still not working?
Showing results for 
Search instead for 
Did you mean: 

Recommended for You