THE GAME HAS CHANGED

Introducing Infoblox Universal DDI ManagementTM

Watch the launch to discover the new era of management for critical network services. Watch Now

Network Automation and Compliance (NetMRI)

Reply

NetMRI policy rule to monitor for IPs configured outside of defined subnet

New Member
Posts: 3
9065     0

Hey all,

Is there a way to create a custom NetMRI policy rule that will check for any rogue IP address in a configuration that is outside of a defined subnet?  If so, what do you think the most efficient method is?

Cheers,

Rich

Re: NetMRI policy rule to monitor for IPs configured outside of defined subnet

Superuser
Posts: 115
9065     0

Can you post an example of each?   It will help us see what you are trying to achive

 

Follow me on LinkedIn: https://www.linkedin.com/in/sifbaksh
Twitter: https://twitter.com/sifbaksh

https://sifbaksh.com

Re: NetMRI policy rule to monitor for IPs configured outside of defined subnet

New Member
Posts: 3
9065     0

I have switch configurations with various IP addresses referenced throughout (i.e. virtual interfaces, ntp servers, snmp server, dns name servers, default gateway, etc.).  All those IP addresses in my configs reside in a couple different subnets (i.e. 10.80.10.0/24, 10.80.11.0/24).

 

Let's say a bad actor logged onto a switch and configured an interface and snmp-server in 192.168.1.0/24, outside of those two subnets above.  I want to write a policy in NetMRI that would alert on that "untrusted subnet" configuration change.  In other words, any configured IPs within those two subnets above would be "safe", anything deviating from those I would want to know about.

 

I'm struggling with how to write the policy and am looking for some guidance.

Re: NetMRI policy rule to monitor for IPs configured outside of defined subnet

Superuser
Posts: 115
9065     0

Well I would approach it a diffrent way using Rule Logic Builder and Negative Look Ahead in RegEX

 

RegEx Rule Negative lookahead.jpg

 

 

What the above mean is that if any other logging server besides 192.168.1.11 this will through an error

 

So now you can do that that for Logging, TACACS Servers, SNMP, etc...

 

I hope this helps

 

Follow me on LinkedIn: https://www.linkedin.com/in/sifbaksh
Twitter: https://twitter.com/sifbaksh

https://sifbaksh.com

Re: NetMRI policy rule to monitor for IPs configured outside of defined subnet

Expert
Posts: 70
9065     0

Sif,

 

Good tip on the negative lookahead.  Is that how the CPD is implemented when one has:

  required:

    access-list 123 permit ip 1.1.1.1

 invalid:

    access-list 123 .*

 

Re: NetMRI policy rule to monitor for IPs configured outside of defined subnet

Superuser
Posts: 115
9065     0

I will have to double check CPD, I haven't used it in like 7 years

Follow me on LinkedIn: https://www.linkedin.com/in/sifbaksh
Twitter: https://twitter.com/sifbaksh

https://sifbaksh.com

Re: NetMRI policy rule to monitor for IPs configured outside of defined subnet

Superuser
Posts: 115
9065     0

Of course you know I had to test it Smiley LOL

 

And yes you are correct CPD does worked that way

Follow me on LinkedIn: https://www.linkedin.com/in/sifbaksh
Twitter: https://twitter.com/sifbaksh

https://sifbaksh.com

Re: NetMRI policy rule to monitor for IPs configured outside of defined subnet

Expert
Posts: 70
9065     0

I know that CPD has been deprecated but it's so intuitive for "mortals" who want to copy/paste config snippets.  And it has always accepted regex if one used that.

 

Re: NetMRI policy rule to monitor for IPs configured outside of defined subnet

[ Edited ]
New Member
Posts: 3
9066     0

Sbaksh,

 

Thank you for the information here; this seems to work! 

 

One issue now though is that the rules only pick up the *first* violation in the configuration.  The second violations (and beyond) seem to be ignored in my tests.  Is there a way to find and report on *all* violations instead of just the first one within Rule Logic Builder?

 

My final related question is that I am trying to build the rule checks against *custom* fields I have set on some devices.  I only see a fixed list of default attributes to choose from.  Am I missing something or am I just stuck with the default attributes here?

 

Thanks again,

 

Rich

Re: NetMRI policy rule to monitor for IPs configured outside of defined subnet

Superuser
Posts: 115
9066     0

Can you post your rule?

 

Either a screenshot or upload the XML

Follow me on LinkedIn: https://www.linkedin.com/in/sifbaksh
Twitter: https://twitter.com/sifbaksh

https://sifbaksh.com
Showing results for 
Search instead for 
Did you mean: 

Recommended for You