Reply

Cisco AP DHCP Option 43 with Infoblox

Techie
Posts: 10
7092     0

Hello,

We trying to achieve assigning dhcp option 43 based on VCI

Rules are simple
1)

If the VCI is "ciscopnp" then it is a switch and we need to return the DNAC IP address
option 43 ACSII value "5A1N;B2;K4;I10.93.4.40;J80"
2)

If the VCI contains something else (or if the VCI starts with "Cisco AP") then it is a wifi AP and we need to return the IP address of the wireless controller option 43 value hex: f1:08:0a:5d:04:14:0a:dd:04:14

If we setup the DHCP options inidvidually - without the logic filters it works correctly for both AP and Switches. Switches works OK also with the logic filter But when we setup logic filters for AP some 2b0a prefix appears in the string value which result in failed onboarding of AP to WLC. Visible on the left image of wireshark dumps.

Im trying to find out origin of the 2b0a prefix does any have some tips?
Thank you in advance

Stanislav

StanislavMikulenka41507_0-1678881923303.png

including the logic filters

StanislavMikulenka41507_1-1678881946011.png

StanislavMikulenka41507_2-1678881959108.png

 

Re: Cisco AP DHCP Option 43 with Infoblox

Expert
Posts: 188
7093     0

Ok I think you are attacking this from the wrong direction - option spaces will do what you want, have a read of this article:

 

http://www.mikealbano.com/2014/06/dhcp-option-for-wlc-ip-using-infoblox.html

 

Paul Roberts
PCN (UK) Ltd

All opinions expressed are my own and not representative of PCN Inc./PCN (UK) Ltd. E&OE

Re: Cisco AP DHCP Option 43 with Infoblox

Techie
Posts: 10
7093     0

Hello,

thank you for reply. Actually im using option filters i only didnt post it sry for that.

But what i want to try is to use the option 60 VCI as EQUAL - for each individual cisco ap model and second i try to option 241 instead of 43. Because I think our problem is the prefix 2b0a - due to this the onboarding is not working.

Regards
St
image.png

Re: Cisco AP DHCP Option 43 with Infoblox

Techie
Posts: 10
7093     0

Hi,

so to confirm i used the option 241 with decimal format and it is working now!

 

whats interesting that in packet capture is visible the hex

Thank you

 

image.png

Showing results for 
Search instead for 
Did you mean: 

Recommended for You

NIOS 8.6.3 – What’s New in DDI