12-12-2019 02:50 PM
I am using the "Azure_vNIOS_Install.pdf" guide to set up a demo for a customer. I have a single Ubunti vm running in Azure. I have successfully created a vDiscovery job with Service Endpoint, Client ID and Client Secret details. The vDiscovery job runs without error but does not report anything. In the syslog I see Number of TENANT, Number of VM etc all at 0.
There is a subsequent section in the guide "Adding vDiscovery Application as a New User". I don't believe that I have done that but the screen shots in the guide do not match what I see in the Azure portal.
Any help would be appreciated.
03-04-2020 12:54 PM
There have been some changes to this in the Azure Portal since that guide was published. Please take a look at the new Deployment Guide: Deploy vNIOS in Azure Using ARM Templates. The section on Infoblox vDiscovery for Azure has updated screenshots and step-by-step guidance on App Registration and assigning permissions.
10-30-2020 02:34 AM - edited 10-30-2020 02:36 AM
I have not been capable to launch this service correctly for several days,
it's not mentioned anywhere in the Azure-infoblox-vnios-deployment-guide
Error while running the job: The job has failed. If the "ERROR: PycURL error: (60, 'SSL certificate problem: unable to get local issuer certificate')" error message is displayed, it means that the certificate has expired or is invalid.
I need to remove the expired or invalid certificate and upload a new one but how ?
<span id="id1af" class="ib-cdiscovery-status-error-icon"
title="initialize or call AZURE cdiscovery driver ERROR:
PycURL error: (60, 'SSL certificate problem: unable to get local issuer certificate')
Error while running Job</span>
11-03-2020 09:17 AM
03-05-2022 10:43 AM
Is there any other possible cause for this error? Continuing to see it after adding the Intermediate and Root certs.
03-05-2022 12:26 PM
I have been seeing this issue again lately. There have been some additional certificate changes on Microsoft's side.You will need to get a copy of the “Digicert Global Root CA” root CA certificate and load it into NIOS. The needed root CA certificate is available from the following web page:
The specific root CA certificate is at the following URL (in PEM format):