Reply

When you set the NTP servers for a grid, is the NTP feed happens independtly to each member?

Guru
Posts: 58
8390     0

Hi

 

When you set the NTP servers for a grid, is the NTP feed happens independtly to each member? or via the Grid Master?

 

 

Kindly

Wasfi Bounni

Re: When you set the NTP servers for a grid, is the NTP feed happens independtly to each member?

Expert
Posts: 188
8390     0

By default, members use the grid master for their NTP feed, if you run "show ntp" from the command line on the member you will only see one NTP server configured with a weird IP address, that's the VPN IP address of the grid master.

 

You can however also define NTP servers for each member so that they each have multiple NTP servers, but that's not the default.

 

Have you thought about standing up a lab so you can test stuff like this? It might help with some of your other questions.

Paul Roberts
PCN (UK) Ltd

All opinions expressed are my own and not representative of PCN Inc./PCN (UK) Ltd. E&OE

Re: When you set the NTP servers for a grid, is the NTP feed happens independtly to each member?

Guru
Posts: 58
8391     0

Hi Paul

 

I have built a lab indeed and yes, it is very helpful. Thank you for your help.

 

 

Kindly

Wasfi

Showing results for 
Search instead for 
Did you mean: 

Recommended for You